Degree: Bachelor of Science (B.Sc.)

Regular program length: 6 semester (full-time program)

Credit points (ECTS): 180 credit points

Language of instruction: German

Limited capacity:
First semester: no
Higher semester: no
Application possible for:
First semester: winter term
Higher semester: winter and summer term
Application deadline:
German and EU nationals
First semester: September 15
Higher semester: September 15 for winter term, March 15 for summer term
Non-EU nationals
First semester: July 15
Higher semester: July 15 for winter term, January 15 for summer term

Degree and duration

Regular program length of 3 years leading to a "Bachelor of Science (B.Sc.)" degree; 180 credit points (corresponding to the Europen Credit Transfer and Accumulation System - ETCS) must be completed. Individual program length may differ from normal program length.

Studienaufbau

Der Maschinenbau ist eine der klassischen Ingenieurwissenschaften. Wer dieses Fach studiert hat, erfindet, gestaltet, implementiert und verbessert eine Vielzahl von Produkten, v.a. Maschinen, Anlagen, Geräte und Fahrzeuge. Die Spanne reicht vom Großkraftwerk bis zum Ohrimplantat. Auch Produktionsmethoden und Werkstoffentwicklung sind Themen des Maschinenbaus. Als Arbeitsmethoden erlernst du sowohl die allzeit gültigen Grundsätze der Mathematik und der Mechanik als auch Computersimulation und Künstliche Intelligenz.

In den ersten vier Semestern erwirbst du wichtige Grundlagen, die dir ermöglichen, dich später in verschiedensten Bereichen zu spezialisieren. Dazu gehören Technische Mechanik, Maschinenkonstruktionslehre, Werkstoffkunde, Informatik und Mathematik. Hinzu kommen später Thermodynamik, Strömungslehre und weitere Themen.

Gegen Ende des Bachelorstudiums kannst du durch die Wahl einer Vertiefung (aus drei Lehrveranstaltungen) einen ersten eigenen Schwerpunkt setzen. Zur Auswahl stehen die Themen

  • Mobilitätssysteme
  • Computational Engineering
  • Intelligente Systeme
  • Nachhaltige Energietechnik
  • Angewandte Materialien
  • Menschzentrierte Produktentwicklung und Produktion

Die Bachelorarbeit ist eine weitere Möglichkeit, ein eigenes Interesse zu vertiefen. Außerdem erwirbst du im Studium überfachliche Kompetenzen wie wissenschaftliches Arbeiten und Teamarbeit in der Konstruktion.

Ein Berufspraktikum ist im fortgeschrittenen Studium eingeplant. Ein Vorpraktikum wird nicht erwartet.

Through a research and practical orientation of the six-semester Bachelor's degree program for mechanical engineering at KIT, graduates of the program are prepared for lifelong learning and employment in typical professional fields of mechanical engineering in industry, services, and public administration. They acquire the academic qualifications to pursue a Master's degree program in mechanical engineering or related disciplines.

In the fundamental area of the studies, graduates acquire sound basic knowledge in engineering. With this in-depth knowledge of scientific theories, principles, and methods, graduates can successfully deal with clearly specified problems that have a unique solution approach in mechanical engineering.

In the specialization area of the studies and in the thesis, cross-disciplinary problem-solving and synthesis skills for engineering systems are developed. Graduates are able to generate new solutions in the areas of their choice of engineering.

Graduates of the Bachelor's degree program in mechanical engineering at KIT can select basic methods in order to create models and compare them in familiar situations. They are able to take over and to work independently on preset problems and resulting tasks in organized teams, to integrate the results of others and to present and interpret their own results in written form. They can identify, analyze, and develop systems and processes, and apply predefined assessment criteria, taking into account technical, economic, and social constraints.

Excerpt from the diploma supplement of the study program

Nach dem Abschluss des Bachelorstudiengangs Maschinenbau am KIT kannst du entscheiden, ob du im Masterstudium deine Qualifikation fortsetzen oder gleich in den Beruf einsteigen willst. Klassische Einsatzfelder im Maschinenbau sind Produktentwicklung, Konstruktion, Produktion, Vertrieb und Kundendienst, Sicherheitswesen, technische Überwachung, Umweltschutz, Produkt- und Qualitätsmanagement. Es gibt kaum eine Branche, in der die Kenntnisse aus dem Maschinenbau nicht eingesetzt werden können, von der Medizintechnik bis zur Windenergie, vom Nutzfahrzeugbau bis zum Spiele-Design. Neben der Industrie sind auch Unternehmensberatungen und Patentbüros, Fachmedien sowie Ausbildungseinrichtungen mögliche Einsatzfelder. Für manche Positionen und Aufgaben, z.B. in Forschung und Entwicklung, wird der Masterabschluss erwartet. Mit dem Bachelorabschluss vom KIT ist der Zugang zum Masterstudiengang Maschinenbau direkt möglich.

  • Hohes Lehrniveau und hohe Uni-Ranking-Positionen
  • Vorbereitungs- und Unterstützungskurse im MINT-Kolleg
  • Masterzugang für KIT-Absolventen garantiert
  • Einblicke in Großforschung und Innovationsschwerpunkte
  • Gute Möglichkeiten zur Mitarbeit an Instituten („Hiwi-Jobs“) und später ggf. Promotion
  • Großes extracurriculares Angebot (Hochschulgruppen, Unisport, Studium Generale)
  • Studentische Ingenieurgruppen (Rennwagenbau, Roboterbau, Ingenieure ohne Grenzen…)
  • KIT-Gründerschmiede

German applicants and those with German-equivalent applicant status

Germans, EU nationals, and non-EU nationals with a German university entrance qualification are eligible to study at KIT if they have one of the following qualifications:

  1. General university entrance qualification (Abitur)
  2. (relevant) Fachgebundene Hochschulreife (subject-linked university entrance qualification, not Fachhochschulreife / university of applied sciences entrace qualification)
  3. Delta examination of the University of Mannheim (for holders of a Fachhochschulreife)
  4. a recognized diploma of advanced vocational training (e.g. technician, Meister diploma for craftsman) or an aptitude test for vocationally qualified persons

For additional possibilities, see §58 of the Landeshochschulgesetz (State Higher Education Act).

Furthermore, prerequisite for enrollment is the participation in a study orientation test (e.g. at www.was-studiere-ich.de) or a study orientation counseling, e.g. by the Zentrale Studienberatung (student advisory services) at KIT, according to §60 Landeshochschulgesetz (State Higher Education Act).

German citizens with foreign school-leaving qualifications must have the equivalence of their qualification with the German Abitur certified by the responsible Regierungspraesidium (regional authority).

Foreign nationals (non-EU)

In Germany, the school leaving certificate of institutions in certain countries is accepted as direct means to enter university. In order to start your bachelor's studies in Germany, a university entrange test and / or one completed year of education at an institute of higher education and / or the "Feststellungsprüfung" (test of aptitude of foreign applicants for studies at universities in Germany) needs to be demonstrated in addition in most cases. You can find country-specific regulations in the "Zulassungsdatenbank des DAAD" (database on adimission requirements of the German Academy Exchange Service) or in the Anabin database (database of the "Zentralstelle für ausländisches Bildungswesen", only available in German). If you have further questions, please contact the International Students Office.

Knowledge of the German language for foreign nationals

In order to be accepted into a study program taught in German, foreign nationals need to demonstrate knowledge of the German language. For your application, you need to demonstrate knowledge of level B1. All such certificates are accepted, even a certificate of attendance of a B1 course. During the enrollment process, you need to submit a DSH2 certificate or an accepted equivalent thereof. If you have further questions, please contact the International Students Office.

Bewerbung für das 1. Fachsemester

 
Bewerbungsfrist für das Sommersemester
abgelaufen

Bewerbung für das 2. oder höheres Fachsemester

 
Bewerbungsfrist für das Sommersemester
abgelaufen
MINT-Kolleg MINT-Kolleg

Prepatory courses at KIT: The MINT-Kolleg offers prospective and first-year students support in natural science and technical subjects (STEM).

In addition, the KIT-Departments offer special preliminary courses before the start of the semester program during the "O-Phase" (orientation week).

The KIT offers support for all first-year students in order to have a successful start of their studies. Numerous orientation events and mentoring programs at the KIT-Departments help students to make friends, orientate themselves and find support where needed. The central online portalstudienstart.kit.edu is a first guide to all important offers, brings together all relevant information and contains helpful hints for a successful start of your studies:

  • advisory centers
  • mentoring programs
  • info sessions
  • workshops
  • extensive online information
Karin Schmurr
Student advisor
Student advisory services (ZSB)

+49 721 608 - 44930Karin Schmurr does-not-exist.kit edu

 

Karlsruher Institut für Technologie (KIT)
Zentrale Studienberatung (ZSB)
Engelbert-Arnold-Str. 2
76131 Karlsruhe

Studierendenservice

 

+49 721 608 - 82222

 

Contacts for students

Contacts for applicants

 

Karlsruher Institut für Technologie (KIT)
Studierendenservice
Kaiserstr. 12
76131 Karlsruhe

 

Business hours

International Students Office
First point of contact for international applicants

+49 721 608 - 44911

Contact form

 

Karlsruher Institut für Technologie (KIT)
International Students Office (IStO)
Adenauerring 2
76131 Karlsruhe

Current studies and examination regulations Mechanical Engineering B.Sc.
Titel Stand Download
28.04.2023, veröffentlicht 28.04.2023

PDF

Previous studies and examination regulations Mechanical Engineering B.Sc.
Titel Stand Download
30.03.2023, veröffentlicht 30.03.2023

PDF

20.05.2022, veröffentlicht 20.05.2022

PDF

28.03.2022, veröffentlicht 28.03.2022

PDF

04.09.2020, veröffentlicht 04.09.2020

PDF

26.02.2019, veröffentlicht 26.02.2019

PDF

06.08.2015, veröffentlicht 06.08.2015

PDF

01.10.2014, veröffentlicht 01.10.2014

PDF

28.03.2014, veröffentlicht 28.03.2014

PDF

12.08.2013, veröffentlicht 20.08.2013

PDF

01.08.2011, veröffentlicht 11.08.2011

PDF

09.09.2008

PDF

17.03.2005

PDF

21.08.2003

PDF

21.08.2003

PDF

15.08.2000

PDF

WT 2023/24

10-23-2023 to 02-17-2024

ST 2024

04-15-2024 to 07-27-2024

WT 2024/25

10-21-2024 to 02-15-2025

ST 2025

04-22-2025 to 08-02-2025

WT 2025/26

10-27-2025 to 02-21-2026

ST 2026

04-20-2026 to 08-01-2026

WT 2026/27

10-26-2026 to 02-20-2027

ST 2027

04-19-2027 to 07-31-2027

WT 2027/28

10-25-2027 to 02-19-2028

ST 2028

04-18-2028 to 07-29-2028

Lectures will not take place:
  • From 12-24 to 01-06
  • the week after Pentecost
  • on all public holidays in the state of Baden-Wuerttemberg